Equipment Descriptions and Pictures

All Metals Fabricating, Inc. Allen, Texas

Equipment
	Bystronic Byspeed 3015 Laser- It is a 4000-watt precision laser that can make up to 350 square holes per minute. It features an automatic material feed, which rapidly loads full sheets (120 x 60) into the machine. Combined with the Bysoft programming software this is an excellent system for both prototype and production jobs.

Bystronic Bystar 3015 Laser- It has a 4000-watt resonator enabling it to cut 3/4” thick steel and 3/8” thick aluminum. It features an automatic material feed, which rapidly loads full sheets into the machine. Combined with the Bysoft programming software this is an excellent system for both prototype and production jobs.
	Haeger 824 Robotic Hardware Installation Machines - We have three machines that can install a variety of hardware: standoffs, studs, flush nuts, threaded nuts and rivets & much more!
Our Amada HFE 1304S is a 143-ton, down-acting hydraulic press brake with a bed length of 14 feet. The ram repeatability is ±0.0004", with a maximum bend of 169".

	Amada 357 Turret Punch- 33 ton, 50”x72” table. Capable of punching up to 1/4" thick steel. The turret is equipped with 58 tool stations.

Amada 255 Turret Punch - 22 ton, 50”x50” table. A high speed punch capable of punching up to 700 hits per minute. The turret is equipped with 31 tool stations.

	Our 2008 Kitamura HX400if is a 25 HP High Precision, High Production Horizontal Machining Center. It is ideal for simultaneous 4-Axis machining of medium size parts and can machine parts up to 880 lbs at 13,000 RPM.

Strippet 40 ton single Punch - Uses manual back and side gauges. Euromac XP750/50 Punch - 50 ton. Computer controlled and capable of multiple hits using a single punch.

	Amada RG 50 Press Brakes-These are 55-ton machines that can bend a part up to 6’ long.The back gage is controlled by a computer and has a repeatability of +/- .002. We have four of these machines. The Amada RG 100 Press Brake is a 110 ton, 10’ long version of the RG 50.

Amada HFE 1304 Press Brake- This is our new (2005) 14' long, 150 ton machine. It is equipped with a multi-axis back gage. Di-Acro 150-ton Press Brake- This is a 150 ton, 14’ long machine. It uses a Hurco back gage and has a maximum bend length of 24”. Cincinnati AutoForm Press Brake- This is a 90 ton, 10’ long machine.It has a computer controlled back gage with built in cad system. Di-Acro 35 ton Press Brake- 35 ton, 6’ long. This machine uses a Hurco computer controlled back gage and can maintain a tolerance of +/- .003. (Machine not shown.)

	Leadwell MCV-1300S Milling Machine- 6000rpm max.50”x30” travel. We have 3 CNC mills capable of handling a variety of milling applications. Leadwell MCV1000AP Milling Machine- 6000rpm max, 40”x20” travel. (Shown) Leadwell MCV-OP Milling Machine- 6000rpm max, 20”x10” travel. Hitachi Seiki Hitec-Turn 23J Lathe- It has a maximum machining length of 23.6 in. and a 10” machining diameter. It has a maximum turning speed of 4000rpm. Elgin Lathe- This is a smaller machine used mainly for the production of small parts.

Welding Machines- We have an extensive welding department. Whether your needs require tig or mig welding, our certified welders are capable of welding the most complex assemblies out of a variety of material types and thicknesses.

	Carborendum Polishing Machine- This machine is used extensively in our grinding dept. to finish flat surfaces.(Shown) Rock tumbling machines – Used extensively for small parts that do not require a cosmetic finish. Pauli & Griffen Sandblaster – used for products that require a bead blasted finish, commonly used on stainless steel. Deburr machines - Used to remove the sharp edges created after shearing.

Timesaver Series 3100 Combination- This new belt sander is ideal for high production deburring and finishing. Combined with a 48" scotchbrite disc that can produce a better quality finish as well as deburred edges and holes.